Installing The Midplane Kit - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Ê Hold the midplane kit by the metal bar (1) and at the recess at the bottom
edge (2) and unplug the midplane from the connectors of the HDD/SSD
bridge board.
Ê Move the midplane kit about 5 cm to the front (3) and remove it in a vertical
motion of the chassis.
9.2.3

Installing the midplane kit

Figure 80: Installing the midplane kit (A)
Ê Lower the midplane kit in a vertical motion into the chassis as shown.
Ê Move the midplane kit in the direction of the arrows so that the guide pins
(see circles) fit into the slots in the housing wall.
CX400 M4
Upgrade and Maintenance Manual
Midplane kit
153