Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual page 45

Figure 4: Removing the server enclosure out of the rack (A).
Ê Pull the server enclosure out of the rack as far as it will go (1)
Ê Release the locking springs on both rack rails (2).
Figure 5: Remove the server enclosure out of the rack (B).
Ê Pull out the chassis from the outer rails.
I
Remove the server enclosure from the rack carefully. Must be done
with at least two people.
CX400 M4
Upgrade and Maintenance Manual
Basic hardware procedures
45