Removing The Fan Module - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

8.2.2

Removing the fan module

Removing the fan module 1
CX400 M4
Upgrade and Maintenance Manual
Ê Lift up the cable and the connector
from the gap between fan modules
1 and 3.
Ê Disconnect the fan cable from the
fan connector (see arrows).
Ê Remove the fan module (see
arrow).
V
CAUTION
Don't touch the fan blade
after the fan module was
removed from the chassis
because the fan blade
does rotate by inertia.
System fan module
131