Removing The Hdd/Ssd Bridge Board - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.7.2

Removing the HDD/SSD bridge board

Figure 56: Removing the HDD/SSD bridge board
Ê Carefully shift the HDD/SSD bridge board in the direction of the arrow (1)
until the shoulder screw caps on the chassis will rest in the wide ends of the
keyhole slots on the HDD/SSD bridge board (see circles).
Ê Fold up the HDD/SSD bridge board (2) and remove it.
CX400 M4
Upgrade and Maintenance Manual 115