Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual page 134

System fan module
134 Upgrade and Maintenance Manual
Ê Place the connector into the gap
between fan modules 1 and 3 (see
circle).
Ensure that the top edge of the fan
connector is lower than the fan
height.
Ê Arrange the fan wires and the
connector of fan module 2 into the
gap between fan modules 2 and 4
in the same way as with fan module
1.
Ensure that the top edge of the
connector is lower than the fan.
CX400 M4