Upgrade And Repair Units (Uru) - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

2.1.2

Upgrade and Repair Units (URU)

Upgrade and Repair Units (URU)
Upgrade and Repair Units are non hot-plug components that can be ordered
separately to be installed as options (Upgrade Units) or are available to the
customer through customer self service (Repair Units).
I
For Japan, customer allows only upgrade. For upgrade units as
customer replaceable, please refer to:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
I
Server management error messages and diagnostic indicators on the
front panel and system board will report defective Upgrade and Repair
Units as customer replaceable CSS components.
Upgrade and repair procedures involve shutting down and opening the server.
V
CAUTION!
The device may be seriously damaged or cause damage if it is opened
without authorization or if repairs are attempted by unauthorized and
untrained personnel.
Components that are handled as Upgrade Units
– HDD/SSD bridge board
V
CAUTION!
Installing procedures involving this units must be performed exclusively
by Fujitsu service personnel or technicians trained by Fujitsu. Please
note that unauthorized interference with the system will void the warranty
and exempt the manufacturer from all liability.
Components that are handled solely as Repair Units
– None
CX400 M4
Upgrade and Maintenance Manual
Before you start
17