Installing A 2.5-Inch Hdd/Ssd Dummy Module - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.3.3

Installing a 2.5-inch HDD/SSD dummy module

V
CAUTION!
If the removed HDD/SSD module is not replaced immediately, always
replace the HDD/SSD dummy module into the unused HDD/SSD bay to
comply with applicable EMC regulations and satisfy cooling
requirements.
Figure 47: Installing a 2.5-inch HDD/SSD dummy module
Ê Slide the dummy module into the drive bay until it locks in place.
100 Upgrade and Maintenance Manual
CX400 M4