Changing Hdd/Ssd Cage Bezels; Preliminary Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.8

Changing HDD/SSD cage bezels

Customer Replaceable Unit
(CRU)
Tools: Preliminary and concluding steps: tool-less
Main steps: tool-less
7.8.1

Preliminary steps

Perform the following procedures:
Ê If applicable, shut down the relevant server node as described in section
"Shutting down the server node" on page
"Disconnecting the power cord" on page 41
Ê
Ê If applicable remove all HDD/SSD modules from the relevant HDD/SSD
cage as described in section
page 98.
118
"Removing 2.5-inch HDD/SSD modules" on
Upgrade and Maintenance Manual
Hardware: 5 minutes
40.
CX400 M4