Installing The Hdd/Ssd X4 Front Bezel - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.8.7

Installing the HDD/SSD x4 front bezel

Ê If applicable, remove the HDD/SSD modules beside the front bezel (see
"Removing a 2.5-inch HDD/SSD module" on page
Figure 67: Installing the HDD/SSD x4 front bezel
Ê Insert the bezel in front of the empty cage. The guide pin on the upper edge
of the bezel (1) must be in the recess of the cage.
124 Upgrade and Maintenance Manual
99).
CX400 M4