Replacing The Fan Cable; Preliminary Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

System fan module
8.3

Replacing the fan cable

Field Replaceable Unit
(FRU)
Tools: Preliminary and concluding steps: Phillips PH2 / (+) No. 2 hexagonal
cross SW5 / PZ2
Main steps: tool-less
I
For hotplug operation, it is necessary to plug out the fan cable at first,
then plug out the fan module itself.
8.3.1

Preliminary steps

Perform the following procedures:
"Extending the server enclosure out of the rack" on page 43
Ê
"Opening the server enclosure" on page 50
Ê
142 Upgrade and Maintenance Manual
Hardware: 10 minutes
CX400 M4