Sine Encoder With Hall (X1) - Kollmorgen S700 Series Instruction Manual

S748-772 Instructions Manual | 9 Electrical Installation

9.12.11 Sine Encoder with Hall (X1)

Feedback devices (incremental or sine-cosine), which don't deliver an absolute information
for commutation, can be used as complete feedback system combined with an additional
Hall encoder (primary, (➜ # 74)) .
The thermal control in the motor is connected to X1 and evaluated there.
All signals are connected to X1 and evaluated there. If cable lengths of more than 25 m are
planned, please consult our customer service.
Frequency limit (sin, cos): 350 kHz
Type
SinCos 5V mit Hall
SinCos 12V mit Hall
86 Kollmorgen | kdn.kollmorgen.com | July 2019
FBTYPE EXTPOS
5 -
6 -
GEARMODE Up
- 5V +/-5%
- 7.5...11V