Fitting The Holding Clamps; Fitting Spacers For The Protective Glass - kruss DSA100 Installation And Operation Manual

page 52
7.7.8

Fitting the holding clamps

Samples can be safeguarded against falling with the holding clamps supplied.
If required, place the two holding clamps with the pins in the holes in the

corners of the sample table rest.
SPA C SPA C SPAC SPAC
7.7.9

Fitting spacers for the protective glass

!
If the protective glass is fitted without spacers, the tilting table can come into
contact with the protective glass.
Place the two spacers on the pins of the protective glass.

Place the protective glass with the spacers on the magnetic holder on the front

of the DSA100.
SPA C SPA C SPAC SPAC
Mounting axes