Vc) Mounting - kruss DSA100 Installation And Operation Manual

Appendix
Setting the boards
The first module to be plugged receives the address 4, the second and third the
addresses 5 and 6 in ascending order.
 Turn the screw with the help of a screw driver so that the slit points to the
required number.
Port assignment for multi-dosing units DS3222-3228
Both the syringe revolver and the syringes drivers are connected to the electronic
module(s):
The connections of the syringe revolver always occupy ports 1 and 2 of the first

electronic module (address 4).
The syringe drivers occupy the further ports in a special order that depends on

the number of drivers. The plugs coming from the syringe drives are marked
with 1 to 4 dots. The left syringe driver unit is assigned to syringe numbers 1-4,
the right-hand side unit to numbers 5-8.
Vc) Mounting
Safety instructions
Switch off and unplug the DSA100 before starting with the installation.
Damage by electrostatic charge

Touching the electronic module when the body is charged electrostatically can
damage electronic components.
 Before touching the electronics board discharge yourself, for example by
touching a metallic part of the panel.
'
addresses
page 107