Assembling The Dosing Unit To The Dsa100 - kruss DSA100 Installation And Operation Manual

page 56
8.2

Assembling the dosing unit to the DSA100

1. Use the four hexagon socket screws provided to fasten the stand of the manual
dosing unit to the attachment plate.
2. Assemble the syringe holder as shown in the following illustration.
3. Place the syringe holder with the two pins in the holes of the dosing stand and
fasten it to the stand with the screw.
SPA C SPA C SPAC SPAC
Manual single-dosing unit DS3200/3201
attachment
plate
horizontal
alignment
Syringe adaptor