Mounting Steps For A Multi-Dosing Unit If Ordered Afterwards; Iva) Assembling The Syringe Driver Unit(S) - kruss DSA100 Installation And Operation Manual

page 96
Mounting steps for a multi-dosing unit if ordered
IV
afterwards

The following steps are usually not necessary if the multi-Dosing unit was
ordered together with the DSA100.
Assembling the syringe driver unit(s)
IVa)
Depending on the number of syringes one or two syringe driver units with two to
four syringe drivers each must be assembled to left and right-hand chamber of the
DSA100.
Overview
The following table shows the required combinations for all multi-dosing units.
dosing unit
DS3222 (2 syringes)
DS3223 (3 syringes)
DS3224 (4 syringes)
DS3225 (5 syringes)
DS3226 (6 syringes)
DS3227 (7 syringes)
DS3228 (8 syringes)
syringe driver units
2-fold driver left
3-fold driver left
4-fold driver left
3-fold driver left
2-fold driver right
4-fold driver left
2-fold driver right
4-fold driver left
3-fold driver right
4-fold driver left
4-fold driver right
Appendix