Frame Grabber Driver For Cf3200/3201; Frame Grabber Driver For Cf3220/21 - kruss DSA100 Installation And Operation Manual

Computer system
3. Select the option

Later, when the installation process is finished, the option
can be selected if this Microsoft service is desired.
!
However, we do not recommend the first option
SPA C SPA C SPAC SPAC
4.2.2

Frame grabber driver for CF3200/3201

After switching-on the PC the Windows hardware assistant detects the new board.
The assistant for driver installation starts.

All drivers required for installation are located on the DSA1/DSA3/DSA4 CD.

After installing the frame grabber the DSA1/DSA3/DSA4 software can be
installed. Further information is given in the DSA1/DSA3/DSA4 manual.
 Let the assistant search for the drivers on the DSA1/DSA3/DSA4 CD. The drivers
will be installed automatically after confirmation with
SPA C SPA C SPAC SPAC
4.2.3

Frame grabber driver for CF3220/21

First close all running programs; several re-boots are necessary during the

installation process.
The installation of the driver is to be performed in several steps:
Step 1: Installation of the software "PFRemote".

Step 2: Frame grabber driver installation.

Step 3: Installation of the "Mil-Lite" patch.

Step 4: Possibly necessary: firmware update of the frame grabber.

Step 5: Reducing the hardware acceleration

Never search Windows Update for drivers and click on OK.
Ask me to search
without asking me.
OK.
page 13
...