Verify The Inserter Has Power; Turn On The Touch Screen; Log In - Pitney Bowes Relay 3000 User Manual

3 ● Run a Job

Verify the Inserter Has Power

1. Verify the power cord is
connected to the socket on the
back of the inserter.
2. Verify the power cord is
plugged into a power outlet
near the machine and is easily
accessible.
3. Turn the power switch ON.

Turn On the Touch Screen

1. Make sure the inserter is
powered up before you power
up the touch screen.
2. Press and hold the ON/
OFF power button for a few
seconds. The power button is
located on the top left rim of
the touch screen.
NOTE: If the touch screen is in
sleep mode, press the ON/OFF
button.

Log In

1. Tap the
2. Highlight the operator name from the list and tap
3. To launch the keyboard, tap the
the screen and type the password in the field. .
4. Tap . The main control screen opens.
Operators can run all pre-programmed jobs using the touch screen main
control screen.
3-4
icon twice.
Touch Screen ON/OFF power button
icon in the bottom right corner of
.
SV63138 Rev. A