Scan; Start System Scan - Motorola Commercial CM160 User Manual

SCAN

Your radio is equipped with the Scan feature, which
allows you to search for, lock onto, and monitor
voice activity on channels. Scan lists are assigned
per channel, by your dealer. Your radio
automatically switches to a channel, within that scan
list, when it detects activity. You can also edit these
lists through the radio menu.
• The green LED indicator flashes during scan
mode; it stops flashing when the radio switches
to an active channel.
The Gsymbol appears on the display while in
•
scan mode.
• Your dealer can preprogram your radio where, if
the microphone is taken off-hook while in Scan
mode, the scanning activity becomes suspended
until the microphone is replaced.
There are two types of Scan available in your radio:
• System Scan
• Auto Scan
START SYSTEM SCAN G
Press the preprogrammed Scan button to start
System Scan.
– or –
G H
or
1 to select a channel that contains a
Scan list.
D
2 to enter menu mode.
G H
SYS SCAN
3 or until
D
SYS SCAN
4 to select
The display shows the current scan status.
G H
5 or until SCAN ON
D
6 to select the current setting.
English
23