Dtmf Overdial; Dual Control Head; Interactions Between Control Heads - Motorola TETRA MTM5000 Series User Manual

68015000180-MR
Chapter 5 : Features
Information Phase
You are still in the Call-Out mode and you can receive more detailed information about the incident
that occurred through subsequent text or a voice message. You can query for more information
using voice group call or Call-Out text function which enables you to send a text message.
Depending on the settings configured by your service provider, you are able to respond to a Call-Out
by:
Free text
Type a response.
Pre-coded message
Select from a list of predefined replies.
5.4

DTMF Overdial

This feature allows you to communicate with an automated answering device (for example, the voice
mail or answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the
DTMF key sounds a tone and the entered digit is displayed on the screen.
5.5

Dual Control Head

This feature allows you to use two control heads with one transceiver. The control heads are of equal
importance and have almost identical functionality, the only difference is second PTT installed on the
Telephone Style Control Head.
In Dual Control Head mode, when you press Menu→Setup you can choose between two control
heads: CH1 and CH2. Almost all menu items inside them are common for both control heads, except
for: Set Volume, Accry Setup, and Font Level (provided that control heads are different). These
menu items are configured separately for each control head.
NOTE: If this feature is enabled by your service provider, appropriate icons appear on the
display.
Check with your service provider default accessory selections and the radio behavior for all types of
calls as each control head can have different setup.
5.5.1

Interactions between Control Heads

Your service provider can connect one transceiver with either one of the following options:
Two Identical Control Heads
Both control heads have identical resolution and soft-key area location. Identical screens are
displayed on both control heads. Only two Remote Ethernet Control Heads (RECH) or two
Telephone Style Control Heads (TSCH) can be used.
Two Different Control Heads
Both control heads have different resolution, soft-key area location, or both. Any combination of
supported control heads can be used. The active screen is displayed on the operating control head
while an idle screen is displayed on the other control head.
You can use both control heads interchangeably for the same activity (for example, writing a
message). If you start an activity on one control head you can continue it on the second, provided
that token is free.
126