Resetting To Factory Defaults; System Settings Change Dialog Box - Wyse 3315SE Reference Manual

12
Product Overview
The General properties sheet displays information that includes the name of the
product and information about the current software.
Invoke this properties sheet from the Winterm Connection Manager by pressing
the F2 key. The Terminal Properties dialog box displays. The General properties
sheet is the default sheet for the Terminal Properties dialog box. Read the
information on this sheet.

Resetting to Factory Defaults

There is one function on the General properties sheet, Reset the Terminal
Factory Default Property Settings. To use this function to reset the terminal to
factory default settings:
1. Click on the Reset the Terminal Factory Default Property Settings check
box. Figure 3-2 shows the dialog box that displays.
2. Click on Yes to return to the Terminal Properties dialog box.
3. Click on OK in the Terminal Properties dialog box. (The Terminal Settings
Change dialog box displays. See "Shutting Down the Terminal" for more
information about this dialog box).
4. Click on Restart in the Terminal Settings Change dialog box to reset to factory
defaults.
Figure 3-2 System Settings Change Dialog Box
Note
The amount of RAM that is available depends on the
model of terminal in use.