Noise Suppressor Installation; Noise Suppressor - Wyse 3315SE Reference Manual

10

Noise Suppressor Installation

Noise Suppressor Installation
A noise suppressor (ferrite bead) must be installed on the network cable of your
terminal. This installation is necessary to maintain compliance with US FCC B limits
and Europe CISPR B EN55022 Class B limits. The noise suppressor is supplied by
the manufacturer and should be packed in your terminal's shipping carton. The
following figure shows the noise suppressor.
Figure 10-1 Noise Suppressor
Note
This installation procedure applies only to the 3350SE
model WBT.