Mounting The Terminal; Freestanding Desktop Mounting - Wyse 3315SE Reference Manual

40
Installation Procedures
5. Connect the power supply output cable to the Power connector.
6. Plug the AC cord into the power supply, then into an AC outlet.
7. After the cables are connected, install the terminal in its planned location, either
on a desktop or mounted to a wall (see the next section "Mounting the
Terminal").

Mounting the Terminal

The terminal can be freestanding, attached to a wall (an optional wall mount kit is
required), or mounted permanently on a desktop. Instructions for mounting your
terminal are provided in the following paragraphs; use the instructions that are
appropriate for the desired method of mounting your terminal.

Freestanding Desktop Mounting

Model 3350SE terminals are built with a desktop mounting stand as part of the
housing, so they can immediately be put into desktop operation. The terminal is
also weighted and equipped with non-skid feet. "Terminal Features" shows the
Model 3350SE terminal.
Caution
Do not force a connector into its socket. If any undue
resistance is encountered, ensure that the connector is
oriented correctly to the socket.
Caution
Always mount the terminal vertically, with the base
down, to ensure proper cooling.