Using The Upgrade Properties Sheet; Upgrade Properties Sheet - Wyse 3315SE Reference Manual

162
Terminal Firmware Upgrades

Using the Upgrade Properties Sheet

To invoke this properties sheet:
1. Press the F2 key.
2. Click on the Upgrade tab in the Terminal Properties dialog box.
The following table describes the functions found on this properties sheet.
Table 31-1 Upgrade Properties Sheet
Function
Local Firmware
Upgrade
Description
Use this group box to upgrade your terminal's firmware
using an FTP server. The functions are:
Use FTP Information from DHCP Server
Select this function if you want to get the FTP server
and directory information from a DHCP server. Click on
this radio button to select the function. By default the
function is enabled.
Use Local FTP Information
Select this function if you want to enter the FTP server
you will use for the upgrade. Click on the radio button
to select the function. By default the function is
disabled.
Server Name
Enter the name or IP address of the FTP server where
bootstrap.exe and the upgrade firmware reside. The
default is blank.
Server Directory
Enter the directory on the FTP server where
bootstrap.exe resides. The default is blank.
User ID
Enter your user account in this field. The default is
Anonymous.
Password
Enter your password in this field. The default is *****.