At Commands Beginning With - Wyse 3315SE Reference Manual

Table 46-3 AT Commands Beginning with "\"
Command
\A3
\G, \G0
\J,\J0
\L,\L0
\N7
\Q3
\S
\V, \V0
\X,\X0
Table 46-4 AT Commands Beginning with "%"
Command
%C1
%E, %E0
%L
%Q
%R
%V
Description
Maximum MNP block size = 256 characters
Disable port flow control DCE to DCE
Disable port rate adjust
MNP stream link
Set Auto-reliable mode (LAPM with fallback to MNP,
then to normal)
Bidirectional hardware flow control
Display current Configuration, Long Version
Disable /REL connect codes
XON/XOFF pass-through disabled
Description
Data compression requested (V.42bis in LAPM, MNP5
in MNP)
Disable Auto-retrain
Report Line Signal Level in -dBm
Report Line Signal Quality
Display all S registers
Display firmware version
219