Using The Modify User Account Dialog Box; Modify User Account Dialog Box - Wyse 3315SE Reference Manual

192
Client Security

Using the Modify User Account Dialog Box

To invoke this dialog box:
1. Press F2 from the Winterm Connection Manager.
2. Click on the Security tab in the Terminal Properties dialog box.
3. Highlight the account to be modified and click on the Modify User... command
button.
The following table describes the functions of the Modify User Account dialog
box.
Table 39-1 Modify User Account Dialog Box
Function
Enable Password
Change
Available
Connections
Description
Group box used to set up password functions.
Enable Password Change
Click to enable. Enabling the function will allow the
user to change the password. This function is only
activated for User accounts. By default Enable
Password Change is disabled.
Username
This field can not be modified.
Password
Type in the new password. By default the field is the
old password, represented by several asterisks.
Confirm Password
Retype the password. By default the field is the old
password, represented by several asterisks.
Note
The preceding fields are limited to 20 characters
or less.
List box displaying connections.
Available Connections
This list shows all the connections available for
terminal accounts.
Type
The section of the list that shows the connection type.