Ftp And Bootstrap.exe; The Upgrade Process - Wyse 3315SE Reference Manual

Table 31-1 Upgrade Properties Sheet, Continued
Function
Upgrade

FTP and Bootstrap.exe

The download is initiated through the Upgrade command button on the Upgrade
properties sheet. Information in the Upgrade properties sheet must be filled out to
ensure a proper download. See "Resetting Properties" for more details about this
properties sheet.
Bootstrap.exe and params.ini must be installed on your FTP server to use this
method of download. To install these files, drag and drop them from the CD-ROM to
the appropriate directory on your FTP server. The upgrade firmware can be
obtained from manufacturer's customer support.

The Upgrade Process

To upgrade:
1. Place bootstrap.exe, params.ini, and the new firmware file on your FTP server.
2. Press F2 to invoke the Terminal Properties dialog box.
3. Click on the Upgrade properties sheet tab and enter the appropriate
information.
4. Click on the Upgrade command button.
The bootstrap program uses Server Name, User ID, Password, and Server
Directory from the Upgrade properties sheet to access the FTP server. The
program performs the upgrade, checks for errors, and reboots the terminal.
Description
Status
This display box shows status information about the
connection to the FTP server, and the firmware
download. Connect and download errors are also
reported. The default is blank.
Save Password
Check this box to save the entered password in the
registry.
Click on this command button to initiate the upgrade
procedure. By default the button is disabled until an
entry is made in the FTP Server field.
163