At Commands Beginning With - Wyse 3315SE Reference Manual

218
Getting Help
Table 46-2 AT Commands Beginning with "&"
Command
&B1
&C1
&D2
&F, &F0
&M0
&N, &N0
&Q5
&T4
&U1
&V
&W, &W0
&Y, &Y0
Description
Disable port rate adjust
Carrier detect follows data carrier
Hang up and go to command mode during On-to-Off
DTR transition
Recall factory settings as active configuration
Asynchronous mode
Microcom QX/4232hs-compatible numeric result codes
displayed
Error Correction Mode V.42=> MNP=> Async
Grant request from remote for remote digital loopback
test
Data compression enabled
View active configuration, profiles (0,1), and numbers
Save active configuration as User Profile 0
Recall User Profile 0 on power-up