Using The Terminal Settings Change Dialog Box; Terminal Settings Change Dialog Box; Shutdown Window Dialog Box - Wyse 3315SE Reference Manual

100
Terminal Management
The following table describes the functions of this dialog box.
Table 20-1 Shutdown Window Dialog Box
Function
Logout
Shutdown the
Terminal
Shutdown and
Restart

Using the Terminal Settings Change Dialog Box

When you change terminal properties using the Setup Wizard or the Terminal
Properties dialog box, you will click on either the Finish or OK command button to
save your new settings and close the application. The Terminal Settings Change
dialog box will then display. Figure 20-2 shows the Terminal Settings Change
dialog box.
Figure 20-2 Terminal Settings Change Dialog Box
This dialog box contains the Restart command button. The terminal must be
restarted in order for your new settings to take effect. Click on Restart to restart the
terminal. The Winterm Connection Manager displays. See "Connections
Management" for detailed information about configuring and making terminal
connections.
Description
Click on this radio button to invoke the Terminal Login
dialog box. By default this function is not activated. You
must enable the terminal's security function to activate
it.
Click on this radio button to shut down the terminal
without restarting it. A dialog box displays after you
initiate this action. It prompts you as to whether you
want to continue. By default this function is activated.
Click on this radio button to shut down then restart the
terminal. By default this function is activated.