Wyse 3315SE Reference Manual page 196

172
Terminal Firmware Upgrades
4. Using your SNMP manager:
a. Go to Wyse 1.2.3.8.1.2 (wbt3UpDnLoadTable).
b. Go to Wyse 1.2.3.8.1.1.2.1.2 (wbt3UpDnLoadID), user defined string.
c. Go to Wyse 1.2.3.8.1.1.2.1.3 (wbt3UpDnLoadOp), and set its value to
d. Go to Wyse 1.2.3.8.1.1.2.1.4 (wbt3UpDnLoadSrcFile), and set its value to
e. Go to Wyse 1.2.3.8.1.1.2.1.6 (wbt3UpDnLoadFileType), and set its value to
f. Go to Wyse 1.2.3.8.1.1.2.1.7 (wbt3UpDnLoadProtocol), and set its value to 0
g. Go to Wyse 1.2.3.8.1.1.2.1.8 (wbt3UpDnLoadFServer), and set its value to
h. Go to Wyse 1.2.3.8.1.4 (wbt3SubmitLoadJob), and set its value to
Step 4h will initiate an SNMP upgrade to your terminal. If the download is
configured properly, the new image will download and the terminal will reboot
automatically to factory defaults.
Note
The above is used in traps to identify the download
operation.
1 (Download).
the absolute path of the directory where the image file and params.ini are
located.
0 (Binary).
(FTP or TFTP).
the IP address or DNS name of the FTP or TFTP server.
1 (Ready).