112
Connection Configuration
To use the Select a Title for the ICA Connection dialog box, click on Finish.
Dial-In Connection
Choose Dial-In Connection, then click on the Next button. The following sequence
of dialog boxes displays. Use them to set up your dial-in ICA connection.
Figure 22-11 Dial-In Devices Dialog Box
To use the Dial-In Devices dialog box:
1. From the Dial-In Device drop-down scroll list, select one of the following:
a. A modem connection such as Hayes Compatible on Com1.
b. A serial connection such as Serial Cable on Com1.
2. Enter the area code, the phone number, and the country code in the appropriate
fields.
3. Click on Configure to use the Device Properties dialog box. (See "Using the
Device Properties and Configure Command Buttons" for more information on
the Configure command button).
4. See Figures 22-6 through 22-10 and the related text for information about the
dialog boxes in this sequence.
When you are finished with the configuration, the Winterm Connection Manager
displays, listing your new ICA connection.