Manual Dhcp Firmware Upgrades - Wyse 3315SE Reference Manual

178
Terminal Firmware Upgrades
6. Click on the Change DHCP Option... command button.
7. Use the Change Option IDs dialog box to change options, then click on OK to
save.
8. Click on the Upgrade tab.
9. Click on the Use FTP Information From DHCP Server radio button on the
Upgrade properties sheet.
10.Shut down the terminal. See "Shutting Down the Terminal" for more information.
Your terminal will automatically upgrade itself when it is powered-up again.

Manual DHCP Firmware Upgrades

1. Follow instruction 1 through 3 and 5 through 8 in "Automatic Firmware
Upgrades."
2. Click on the Upgrade... command button on the Upgrade properties sheet.
This will initiate the firmware upgrade. Once the upgrade is complete, the terminal
will reboot to the Setup Wizard.
Note
You have now enabled the automatic DHCP function.
You will also need to configure your DHCP option IDs.
Make sure your DHCP options match the options on
the DHCP server.
Note
Pay special attention to these FTP Option IDs
functions: File Server (the location of the server where
the firmware resides), and File Root Path (the location
of the firmware).
Note
You will need the image and the params.ini files on the
FTP server to do the upgrade.