Add Or Change Modem Dialog Box - Wyse 3315SE Reference Manual

152
Connection Configuration
Table 29-3 discusses the functions of this dialog box.
Table 29-3 Add or Change Modem Dialog Box
Function
Modem Name
Init Commands
Flow Settings
Note
The Hayes command set is discussed in greater detail
in "Modem AT Commands."
Description
This field displays the brand name of the modem in
your system.
Enter a modem initialization command string in this
field. The default is ATEOV1&C1&D1<cr>.
Use this group box to set the following flow settings:
Flow Hardware
Enter a flow hardware command string in this field. The
default is AT&K3<cr>.
Flow Software
Enter a flow software command string in this field. The
default is AT&K4<cr>.
Flow Off
Enter a flow hardware command string in this field. The
default is AT&K0<cr>.