Display Adjustments; 3515Se/3715Se/3720Se Terminal Front Panel - Wyse 3315SE Reference Manual

48
Installation Procedures
The logo will appear on the screen, followed by:
• The Setup Wizard, if it is the first time that you have turned on your terminal.
• The Winterm Connection Manager dialog box, if the Setup Wizard has been
completed.
Make sure that the display's geometry and intensities are set to your preferences.
This can be done at any time, whether or not the terminal is connected to a server.
If your terminal is installed with an optional touchscreen, calibrate it now. Refer to
"Input Configuration" for the procedure.

Display Adjustments

The following sections explain how to adjust the screen's brightness, contrast,
horizontal and vertical size and phase, pincushion, and trapezoid.
The terminal uses an OSD (on-screen display) adjustment feature. The OSD is
invoked with the buttons on the front panel (see Terminal Front Panel below).
Figure 8-2 3515SE/3715SE/3720SE Terminal Front Panel
MENU SELECT ADJUST
Power Management
Button