Models 3515Se/3715Se/3720Se Terminal Installation; Locating The Terminal; Connecting The Terminal - Wyse 3315SE Reference Manual

8
Models 3515SE/3715SE/3720SE
Terminal Installation
The following section discusses installation of the integrated-CRT terminals.

Locating the Terminal

Position the terminal on a clean, horizontal surface that is free from vibration and
out of direct sunlight. Allow 75 mm (3 in) of clearance on all sides of the terminal,
for air circulation and movement of the tilt/swivel mechanism. Refer to "Terminal
Specifications" for environmental specifications.

Connecting the Terminal

Before powering-up the terminal, connect it to all of its peripheral devices. The
following figure shows the terminal's back panel connectors.