Call Options Properties Sheet - Wyse 3315SE Reference Manual

Click on the Call Options tab to invoke the Call Options properties sheet. The
following table discusses the functions of this properties sheet.
Table 24-3 Call Options Properties Sheet
Function
Call Setup
Extra Settings
Note
See "Null Modem Cable Pin Assignments" for a
suggested null modem cable for use with your terminal.
Description
Use this group box to configure the following call
parameters:
Cancel the Call if Not Connected Within
1. Enter in this field the number of seconds to wait
before a call is canceled.
2. Click the check box to enable the function.
The default is 120 with the function enabled.
Wait for Dial Tone Before Dialing
Click on the check box to enable the function. The
default for this function is enabled.
Wait for Credit Card Tone
Enter in the field the period (in seconds) of time to wait.
The default is 0.
Use this field for special modem commands.
121