Installing The Modem Card - Wyse 3315SE Reference Manual

Figure 9-2 Installing the Modem Card
Terminal
Back Panel
Option Slot
Cover
(Open to insert
modem card)
To Open Cover
Press down on top to release
catches and swing down
Cover
(Closed)
6. Close the option slot cover (see the following figure).
7. Install the cover screw.
8. Install the clamp-on noise suppressor on the cable assembly. Position it as
closely as possible to the modem card (may not be necessary for other vendors'
cables).
9. Insert the cable-assembly modem card connector through the hole in the closed
cover and into the modem card. Depress the connector tabs while inserting.
Make sure the catches lock the connector in place (see the following figure).
10.Insert the cable-assembly telephone connector into a telephone jack.
11. Power-up the terminal.
12.Modify the terminal configuration settings as instructed in "Changing Terminal
Properties."
Back Panel
Screws (2)
Modem
Card
CAUTION Product label
is on top of card. Do not
push too hard on card or
connector when installing;
damage could occur if
card or connector is upside-
down.
55