96
Terminal Management
Using the Apps Properties Sheet
To invoke the Apps properties sheet:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Apps tab in the Terminal Properties dialog box.
Table 19-1 describes the functions of the Apps properties sheet.
Table 19-1 Apps Properties Sheet
Function
Global Settings
Virtual Ports
RDP Encryption
Enable
SNMP Update
Enable
Description
Group box used to manage ICA sessions.
ICA Client Settings
Click on the ICA Client Settings command button in
the Global Settings group box. See "ICA Session
Management" for detailed information about ICA
session management.
Group box used to set up the virtual port option.
Virtual Port Server
Type in the address of the virtual port server.
Com1 Enable or Com2 Enable or
LPT1 Enable
Click on one or all of these check boxes to assign that
port as a virtual port. These functions are not mutually
exclusive.
Click this check box to check and enable RDP
encryption. By default this function is enabled.
Caution
If your WTS server does not support encryption,
this function must be disabled.
Check this box to enable terminal firmware updates
through SNMP.