Wyse 3315SE Reference Manual page 207

Table 36-1 Security Properties Sheet, Continued
Function
Failover Enable,
continued
AutoLogin Enable
DHCP Connection
Enable
Description
Verbose
Click to enable the Verbose connection function. By
default the box is not activated. This function becomes
activated when either Failover or PingBeforeConnect
is enabled.
This group box is used to configure login parameters.
See "Autologin and Autoconnect" for more information
about autologin.
AutoLogin Enable
Click to enable the function. AutoLogin is enabled only
for the user name currently highlighted in the User
Accounts list box. Enabling the autologin function
activates Single Button Connect. By default the
function is disabled.
User Name
This field is activated by enabling AutoLogin Enable.
By default the field is blank.
Single Button Connect
Click to enable the function. See the chapter "Terminal
Login" for more information. By default the function is
not activated.
Use this group box to access the DHCP connection
list.
DHCP Connection Enable
Click to enable the function. Enabling this function
activates the Connection Name and Type list. By
default this function is disabled.
Connection Name and Type
A scroll list that displays all connections available to
your terminal. You must select the connection that will
use information supplied by DHCP. By default this
function is not activated.
183