Wyse 3315SE Reference Manual page 162

138
Connection Configuration
Table 27-2 TCP/IP Telnet Configuration, Continued
Function
Telnet Name
Force Negotiation
Break Settings
Description
• TN5250 Options
The following dialog box shows the TN5250
Options dialog box, displayed when the 5250
Options command button is pressed.
Use this dialog box to set up 5250 options. They
are:
· Device Name - Name of the device assigned to
a Telnet session.
· User, Password, Library, and Menu - Initial
entries on a standard startup screen.
· Program - Name of the initial program.
Note
All entries are 10 characters or less.
Enter the Telnet virtual terminal name. The default
depends on emulation (VT400, 7-bit, default is vt420).
Use the Binary and EOR drop-down scroll lists to
configure negotiation parameters. The defaults are No
and No.
Use the TM with Break and CR with Break check
boxes to configure break settings. The default for both
functions is activated but not enabled.