Connecting The Modem Card Cable - Wyse 3315SE Reference Manual

56
Installation Procedures
Figure 9-3 Connecting the Modem Card Cable
Connect cable
through hole in
closed cover
To Insert and Remove Connector
Connector must be square to card for
insertion and removal
Metal surface towards
top of domestic (U.S.)
modem card
Depress tabs during
insertion and removal
Arrows toward top of
international modem card
Clamp-On Noise
Suppressor
(see Note)
Do not pull on cable
to remove card
To Close Cover
Option
Slot
Card
Installed
Cover
(Opened)
Cable
Assembly
Caution Product label is on top of card.
Do not push too hard on card or connector
when installing; damage could occur if card or
connector is upside-down.
Caution Inverted connector, excessive side
loading, or failure to depress connector lock
tabs during insertion or removal may result in
damage to card or connector.
Note Mount clamp-on noise suppressor as
close as possible to modem card.
Catches (2)
Phone
Jack