Volume; Auto Registration; Recall Factory Default Settings; Auto Degauss - Wyse Winterm 3000 Series User Manual

36
Chapter 4

Volume

Used to adjust audio volume.

Auto Registration

Adjustments are automatically registered after the Adjust switch is pressed, or by letting
the display automatically close the windows after 15 seconds of inactivity.

Recall factory default settings

To cancel adjustments and recall presets (revert to factory settings), press the Select -
and Adjust - buttons simultaneously to activate the recall function. This resets the display
mode to the factory-preset value.

Auto Degauss

This model is equipped with an automatic degaussing function. Degaussing is
automatically activated when the display is cold (i.e., after having been powered off for
at least 20 minutes) and power is applied. If the monitor is repositioned while warm and
discoloration is observed, turn off the monitor and allow it to cool or select the degauss
option in the OSD display. Upon power-up, the monitor is automatically degaussed and
the discoloration will disappear.
Table 4-4 Screen Control Definitions
Control
Brightness
Contrast
Horizontal Position
Horizontal Sizing
Vertical Position
Vertical Sizing
Pincushion
Pinbalance
Trapezoid
Note
The microphone (Mic) input is not yet supported by software on the Model
3730LE.
Definition
Increases or decreases the intensity (illumination) of the
image.
Increases or decreases the strength (lightness or dimness)
of the image.
Moves the image horizontally on-screen left (-) or right (+).
Increases (+) or decreases (-) the size of the image
horizontally.
Moves the image vertically on screen up (+) or down (-).
Increases (+) or decreases (-) the size of the image
vertically.
Adjusts the side pincushion (or barreling).
Adjusts the curvature of the left and right sides of the
image.
Corrects the image shape to a rectangle.