Specifications - YASKAWA SGD7S-***A20****F62 Series Product Manual

Sigma-7-series ac servo drive, sigma-7s servopack with ft/ex specification for transfer and alignment application
Table of Contents

Advertisement

2.3 Specifications

2.3
Specifications
This section gives the specifications of the SERVOPACKs.
Drive Method
Feedback
Environ-
mental
Conditions
Applicable Standards
Mounting
2-6
Item
IGBT-based PWM control, sine wave current drive
Serial encoder:17 bits (absolute encoder)
With Rotary
Servomotor
• Absolute linear encoder (The signal resolution depends on the abso-
With Linear
lute linear encoder.)
• Incremental linear encoder (The signal resolution depends on the
Servomotor
incremental linear encoder or Serial Converter Unit.)
-5°C to 55°C
(With derating, usage is possible between 55°C and 60°C.)
Surrounding Air Tem-
Refer to the following manual for derating specifications.
*1
perature
Storage Temperature
-20°C to 85°C
Surrounding Air
95% relative humidity max. (with no freezing or condensation)
Humidity
Storage Humidity
95% relative humidity max. (with no freezing or condensation)
Vibration Resistance
4.9 m/s
Shock Resistance
19.6 m/s
I
Degree
Degree of Protection
IP20
IP10
2
• Must be no corrosive or flammable gases.
Pollution Degree
• Must be no exposure to water, oil, or chemicals.
• Must be no dust, salts, or iron dust.
1,000 m max. (With derating, usage is possible between 1,000 m and
2,000 m.)
*1
Altitude
Refer to the following manual for derating specifications.
Do not use the SERVOPACK in the following locations: Locations sub-
Others
ject to static electricity noise, strong electromagnetic/magnetic fields, or
radioactivity
Refer to the following section for details.
Base-mounted
Rack-mounted
Duct-ventilated
Specification
20 bits or 24 bits
(incremental encoder/absolute encoder)
22 bits (absolute encoder)
Σ
Σ
-7-Series
-7S SERVOPACK with MECHATROLINK-III Communications
References Product Manual (Manual No.: SIEP S800001 28)
2
2
SERVOPACK Model: SGD7S-
R70A, R90A, 1R6A, 2R8A, 3R8A, 5R5A, 7R6A, 120A,
R70F, R90F, 2R1F, 2R8F
120A20A008, 180A, 200A, 330A, 470A, 550A, 590A, 780A
Σ
Σ
-7-Series
-7S SERVOPACK with MECHATROLINK-III Communications
References Product Manual (Manual No.: SIEP S800001 28)
Compliance with UL Standards, EU Directives, and Other Safety Stan-
dards on page xxv
Mounting
All Models
R70A, R90A, 1R6A, 2R8A, 3R8A, 5R5A,
7R6A, 120A, 180A, 200A, 330A, R70F,
R90F, 2R1F, 2R8F
470A, 550A, 590A, 780A
SERVOPACK Model: SGD7S-
Continued on next page.

Advertisement

Table of Contents
loading

Table of Contents