Table of Contents
Advertisement
1.1 Product Introduction
1.1
Product Introduction
The SERVOPACKs described in this manual provide the following two functions.
Function
Triggers at Preset
Positions
Rotational Coordi-
nate System
1-2
Triggers at preset positions are signals that are output when a moving part of a
machine passes a preset reference position.
You can set the range of the rotational coordinate system for position data (command
position (CPOS) and feedback position (APOS)) from the host controller in SERVO-
PACK parameters.
Description
Advertisement
Table of Contents
Troubleshooting
