YASKAWA SGD7S-***A20****F62 Series Product Manual page 74

Monitoring with the Digital Operator
Display the monitor data in Monitor Mode to monitor values on the Digital Operator.
The monitor data, which is output within the range of the rotational coordinate system (Pn87A
to Pn87C), are listed below.
Un No. Sign
Un045 Yes
Un046 Yes
Refer to the following manual for information on monitor data that is not listed above.
Σ
-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
Unit
1 reference unit
1 reference unit
4.2 Setup Procedure
Name Description
CPOS Reference position
APOS Feedback position
4.2.6 Monitoring
4
4-13