Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual page 327

3005 Img ed running
This occurs during IMGB, IMGN, or IMGE commands. It
happens when you are creating a custom image with the
Custom Image Editor on a stand-alone generator and, during
that session, you begin an image editing session via the
IMGB or IMGN commands.
Do not use the IMGB or IMGN commands while using
GUI.
3006 Nothing to save
This occurs during IMGA or IMGS commands. It happens
when you try to save the contents of the image editing
register when none is initialized.
You must use IMGN before IMGS or IMGA.
3010 Invalid Lookup Table (LUT) level (8-bit DAC)
The 801GX, 801GC, 801GC-ISA and 801GP generators do
not support analog video DAC settings beyond the range
of 0 through 255.
The levels used with the FRGB command must be
between 0 and 255 when used on the generator models
listed above.
3015 Invalid Lookup Table (LUT) level (10-bit DAC)
The 801GF and 801GF-ISA generators do not support analog
video DAC settings beyond the range of 0 through 1023.
The levels used with the FRGB command must be
between 0 and 1023 when used on the generator models
listed above.
3050 Invalid gray level
The generator does not support gray level percentages beyond
the range of 0 through 100. This error should never occur
under normal operation.
Please contact Quantum Data's technical support
department if you get this message.
8-19