Operating Via Remote Control - Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual

Operating via remote control

6-6
Chapter 6: Programming
The utility disk may also contain a text file called
"README.DOC" that has information on any last
minute additions and changes on programming the
unit.
A Microsoft Windows® compatible software inter-
face package is also available. Please contact your
Quantum Data for ordering information.
The 801G* can be used as a programmable video
test signal source in an automated test system. The
801G* features both RS-232 and IEEE-488 communi-
cations ports. A suitably equipped computer con-
nected to one of these ports can be used to control
most aspects of the generator's operation.
Model 801GC, 801GF & 801GX¥Rev. A