Cancelling The Sequence Mode - Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual

Cancelling the Sequence Mode

6-42
Chapter 6: Programming
will power-up in the sequence mode with the
selected sequence. However, loading another
sequence file with the upper knob, will not al-
low you to get back to the original power-up
sequence file.
You cancel the power-up sequence mode with the
following steps:
• Power-up the 801G* in the programming mode
("Image" button held down on power-up).
• Select the sequence knob directory editor.
• Press the "Modify" button. It does not matter
which sequence file is selected in the right hand
column. The will put you in the sequence edi-
tor.
• Press the Mode button at least one time. Keep
pressing and releasing the button until the
"Mode:" label to the right of the sequence name
goes away.
• Turn off the power.
The next time the 801G* is turned on, it will be in
the normal operating mode. The top knob will se-
lect formats and the bottom knob will select images.
Model 801GC, 801GF & 801GX¥Rev. A