Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual page 278

NAMI
Classification:
Command Syntax:
Limits:
Query Syntax:
Description:
Other Required Cmds:
E x a m p l e s :
NAMK
Classification:
Command Syntax:
Limits:
Query Syntax:
Description:
Other Required Cmds:
Example:
6-152
Chapter 6: Programming
NAMe Insert
Directory editor control
NAMI <index> <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
None
The NAMI command first moves all the names with index values
equal to or greater than <index> to the next higher index value
in the directory edit buffer. It then inserts the name <name> in
the directory edit buffer at position <index>. A negative number
or a zero (0) used for <index> will put <name> at index position
one (1). Using a number for <index> beyond the last name in
the buffer will add <name> to the index position just beyond
the last name. The command does not check if a file called
<name> is stored in the generator.
None
N A M I 5 F O C U S 1 / /
/ / p o s i t i o n
or
N A M I - 6 B A R S / /
/ / o f d i r
or
N A M I 9 9 9 9 9 9 H A T C H
/ / o f d i r
NAMe Kill
Directory editor control
NAMK <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
None
The NAMK command deletes the given name from the directory
edit buffer. All names with index values greater than the index
of the deleted name are moved to the next lower index value in
the buffer. Nothing happens if <name> is not found in the buffer.
None
N A M K V G A _ m 4 / / R e m o v e
Model 801GC, 801GF & 801GX¥Rev. A
P u t F O C U S 1 i n f i f t h
P u t B A R S a t b e g i n n i n g
/ / P u t H A T C H a t
V G A _ m 4 f r o m
e n d
d i r