Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual page 270

IMGS
Classification:
Command Syntax:
Query Syntax:
Description:
Other Required Cmds:
Example:
IMGU
Classification:
Command Syntax:
Query Syntax:
Query Response:
Description:
Other Required Cmds:
Example:
INIT
Classification:
Command Syntax:
Query Syntax:
Description:
Other Required Cmds:
Example:
6-144
Chapter 6: Programming
IMaGe Save
Image memory management
IMGS
None
The IMGS command saves the current contents of the generator's
custom image edit buffer back to the memory location from
which it was originally read.
None
I M G S
IMaGe Use
Image memory management
IMGU
IMGU?
<location>
The IMGU command draws an image based on the current
contents of the image . The IMGU? query returns the image
memory location <location> from which the current contents of
the image were read. See the IMGR command for setting the
contents of the image.
None
I M G L B r i t e B o x / /
/ / t e s t i m a g e
I M G U / / D r a w t h e
INITialize to factory default settings
Direct processor control
INIT
None
The INIT command restores the contents of all of the generator's
RAM storage locations to factory-default conditions. The generator
then goes through a complete self-test and self-calibration
procedure.
WARNING: The INIT command permanently and irreversibly
removes all user-created formats, custom images, test sequences
and directories from memory.
None
I N I T
Model 801GC, 801GF & 801GX¥Rev. A
S e l e c t t h e B r i t e B o x
s e l e c t e d t e s t i m a g e