Quantum Data 801GC, 801GF, 801GX Owner's And Programmer's Manual page 286

SEQA
Classification:
Command Syntax:
Limits:
Query Syntax:
Description:
Other Required Cmds:
Example:
SEQB
Classification:
Command Syntax:
Description:
Other Required Cmds:
Example:
SEQE
Classification:
Command Syntax:
Query Syntax:
Description:
Other Required Cmds:
Example:
6-160
Chapter 6: Programming
SEQuence save As
Sequence memory management
SEQA <name>
<name> = a valid MS-DOS filename
(8 characters minus any extension)
None
The SEQA command saves the current contents of the sequence
edit buffer using the given name.
None
S E Q A M Y _ S E Q / / S a v e
/ / " M Y _ S E Q "
SEQuence editing Begin
Sequence editor control
SEQB
The SEQB command marks the beginning of a sequence editing
session. This command does nothing in the current firmware
version, but is used for compatibility with future versions of
firmware.
Either a SEQL command to load an existing sequence or a SEQN
command to create a new sequence. SEQE when ending the
editing session.
S E Q N / / I n i t i a l i z e
S E Q B / / S t a r t s e q u e n c e
/ / O n e o r m o r e
/ / c o m m a n d s
/ / . . .
S E Q E / / E n d s e q u e n c e
SEQuence editing End
Sequence editor control
SEQE
None
The SEQE command marks the end of a sequence editing session.
This command does nothing in the current firmware version,
but is used for compatibility with future versions of firmware.
SEQB when starting the editing session. Use SEQA or SEQS to
save changes.
S E Q B / / S t a r t s e q u e n c e
/ / O n e o r m o r e
/ / c o m m a n d s
/ / . . .
S E Q E / / E n d s e q u e n c e
S E Q A M Y S E Q _ 0 2 / /
/ / M Y S E Q _ 0 2
Model 801GC, 801GF & 801GX¥Rev. A
w i t h t h e n a m e
s e q u e n c e e d i t b u f f e r
e d i t i n g s e s s i o n
s e q u e n c e e d i t i n g
e d i t i n g s e s s i o n
e d i t i n g s e s s i o n
s e q u e n c e e d i t i n g
e d i t i n g s e s s i o n
S a v e e d i t e d s e q u e n c e a s